NL Ryder and E Weckman, “Effects on Convective Heat Transfer Coefficient In Predictions of Materials Properties from Cone Calorimeter Testing.” 2013 Fire and Materials Conference, Conference Proceedings, San Francisco, CA, 2013.
NL Ryder “The Need for a Certification Program for Modeling use in Support of Performance Based Design and Investigations”, Proceedings of the International Symposium on Fire Investigation Science and Technology, October 2012.
NL Ryder, M Price, G Ligi, P Santangelo, AW Marshall, “Use of Non-Fire Sensors for Fire Detection and Growth Prediction”, 2012 Annual SFPE Conference, Savannah, GA. October 2012.
PE Santangelo, NL Ryder, AW Marshall, CF Schemel, “Flammability of Solid Materials: An Experimental Calorimetric Approach,” Proceedings of the ASME 2011 International Mechanical Engineering Congress and Exposition, Denver Colorado.
NL Ryder, CF Schemel, “Investigating and Learning from Industrial Fires and Explosions,” Proceedings of the 2010 SFPE SAC 3rd Fire Protection and Risk Management Conference, Saudi Arabia.
NL Ryder, CF Schemel, “Appropriate use of Fire & Explosion Modeling Tools for Performance Based Design,” Proceedings of the 2010 SFPE SAC 3rd Fire Protection and Risk Management Conference, Saudi Arabia.
NL Ryder, CF Schemel, S Mannan, “Design Requirements: A Comparison of Vapour Cloud Explosion Models and the Importance of Properly Assessing Potential Incident Impact,” Proceedings of the Mary Kay O’Connor 2009 International Symposium.
NL Ryder, CF Schemel, S Mannan, “Analysis of the Buncefield Oil Depot Explosion: Explosion Modeling and Process Safety Perspective,” Proceedings of the Mary Kay O’Connor 2009 International Symposium.
G. Rein, C. Abecassis Empis, A. Amundarain, H. Biteau, A. Cowlard, A. Chan, W. Jahn, A. Jowsey, P. Reszka, T. Steinhaus, S. Welch, J.L. Torero, J. Stern-Gottfried, B. Hume, A. Coles, M. Lazaro, D. Alvear, J.A. Capote, S. Desanghere, D. Joyeux, NL Ryder, F. Mowrer, “Round-Robin Study of Fire Modeling Blind Predictions Using the Dalmarnock Fire Experiments,” 5th International Symposium on Fires and Explosions Hazards, 2007.
Ryder, N., Schemel, C., and Jankiewicz, S., “Comparing Large Eddy Simulation and Finite Element Analysis Predicted Failure Criteria to ASTM Standards,” presented to the ASM 2004 Materials Solutions Conference, Columbus, Ohio, 2004.
Ryder, N., Olenick, S., “Computer Modeling of a Controlled Full Scale House Burn with Fire Dynamics Simulator: Construction of a Complex Geometry and Comparison of Predictions with Experimental Data,” presented to the NFPA World Safety Conference and Exposition, Dallas, TX, May 2003.
Wolin, S., Ryder, N., “Measurements of Smoke Characteristics in HVAC Ducts,” presented to the NFPA World Fire Safety Congress, Minneapolis, MN, 2002.
Ryder, N., Wolin, S., Milke, J., “An Investigation of the Reduction in Fire Resistance of Steel Columns Caused by Loss of Spray Applied Fire Protection,” Journal of Fire Protection Engineering, Vol. 12, No. 1, 2002.
Ryder, N., Wolin, S., Milke, J., “Analyses of the Impact of Loss of Spray-Applied Fire Protection on the Fire Resistance of Steel Columns,” presented to the International Association of Fire Safety Science Conference, Worcester, MA, 2002.
Zhang, W., Ryder, N., Roby, R., Carpenter, D., “Modeling of the Combustion in Compartment Fires using Large Eddy Simulation Approach,” Proceedings of “Chemical and Physical Processes in Combustion,” presented to the Eastern States Section of the Combustion Institute Fall Technical Meeting, December 2001.